Home About Us Products Technical Information Applications Distributors Exhibitions Contact Protech

EXPLOSION PROOF MICROWAVE (ONLY) Motion Detection Sensor
Explosion Proof Specification Sheets
 
Explosion Proof Installation Guides
       
Wall / Pole Mount Accessories
PH-4EXWLMT  
  G E N E R A L
The SDI-77XL2-EX Model of Stereo Doppler Motion Detection Sensor was developed to protect Hazardous Locations due to the presence of flammable gasses or vapors, combustible dusts or easily ignitable fibers or flyings. The SDI-77XL2-EX electronic assembly is configured to be easily inserted into a special explosion-proof enclosure. The unit is suitable for applications in Hazardous Locations under the following classifications:

Class I, Div. 1 & 2, Groups C,D
Class II, Div. 1 & 2, Groups E,F,G
Class III
NEMA 7CD, 9EFG

The unit is suitable for installations at petroleum refineries, chemical and petrochemical plants, storage areas and other processing facilities where hazardous substances are handled or stored.
  F E A T U R E S

STEREO DOPPLER MICROWAVE DETECTOR:
Two receiving channels with the ability to eliminate vibration and periodically moving objects as sources of false alarms.
MICROPROCESSOR CONTROLLED:
Proprietary integrated circuit design that provides enhanced digital signal processing for microwave sensor.
STEREO DOPPLER SUPERVISION:
A component or power failure will cause the sensor to lock-in alarm.
DIGITAL RANGE CONTROL:
Ten-position digital switch adjusts the overall size of the sensor's detection area (to its maximum range).
DIGITAL SENSITIVITY CONTROL:
Ten-position digital switch adjusts the amount of movement required to initiate an alarm condition.
ENHANCED BIRD/ANIMAL IMMUNITY CONTROL:
Two-position switch adjusts the sensor's immunity to birds and small animals.
ANALYTIC LED'S:
Red Alarm LED, Green ECI (Environmental Caution Indicator) LED with internal disable switch.
TAMPER PROOF:
Housing tamper with terminal connection.
ALL SOLID STATE RELAY:
User selectable form C relay output. A Solid State relay is flexible, silent, and more reliable than an electromechanical relay.
WALK-TEST SOUNDER:
Optional audible tester to assist in the walk-test and initial sensor set-up. The XL-Sounder greatly simplifies the installation as it enables walk-testing and adjustment by a single installer.
  S P E C I F I C A T I O N S
Input Voltage:
8.5 to 20 VDC
Current Consumption:
150 mA @ 12 VDC (LED's off)
RF Power Density: 120 uW/cm2 max at the face of the unit
Operating Temperature:
-30°F to 130°F
-34°C to 54°C
Weight: 40 lbs.
Relay contact Rating : 0.1A,50 V
Frequency: Factory Adjusted to one of the following frequencies:
10,525 MHz - USA
10,587 MHz - International
9,900 MHz - International
9,470 MHz - International
Electrical Access : Housing provided with 1/2" pipe thread. Special hole size, location and thread options available upon request.
ProtechUsa for motion detector switch and superior motion detection sensors when you need a motion detector sensor that outperforms any outdoor motion sensor from other manufacturers that you may be considering. commercial motion sensors need to have an all-weather motion sensor switch that won't fail.