Hard-wired High Security Networked IR Barrier
Approved by the USAF for Protection Level 1 Nuclear & Below
MODULARITTY : Two different housings to adapt to different site configurations
INNOVATION : ZONING function, TCP/IP network for remote set-up and maintenance
ADAPTABILITY : Single or double face; Single or dual direction; Adaptable column heights
The MAXIRIS 3000/3100 infrared barriers deliver the highest level of performance in invisible/virtual fence systems from PROTECH. For perimeters longer than .6 miles (or 1 km), the MAXIRIS 3000/3100 columns can be directly connected to a TCP/IP network or RS485 bus via the MAXIBUS 3000 Hub.
The MAXIRIS ZONING function enables up to three virtual detection zones per barrier/ system that can be configured accordingly, allowing for video verification based on alarms by zone.
Each barrier is self-contained with a multi-lingual HTML server integrated into each column (English, French, Spanish, etc.).
System configuration and maintenance operations can be handled remotely.
- Single face column
- Up to 36 beams per column and per direction
- Zoning function: 4 to 10 cells per column
- Single and double face column
- High-density beams: up to 64 beams per two-direction column
- Zoning function: minimum of 4 to maximum of 10 cells per column
- Zoning function: 4 to 10 cells per column
The MAXIRIS technology and housing allow it to be installed on a wide variety of sites:
- logistics sites,
- particularly sensitive sites: prisons, nuclear power plants, military sites, etc.
- public places: airports, metros, etc.
- industrial sites, etc.
|MAXIRIS 3000||MAXIRIS 3100|
|Maximum interior range||1,640 ft./500 m||1,640 ft./500 m|
|Maximum exterior range at all times||3,200 ft./100 m||3,200 ft./100 m|
|Column height||3.6 ft. 1.1 m - 6.5 ft. 2 m - 8 ft. 2.5 m - 10 ft. 3 m - 12.5 ft. 3.8 m||3.2 ft. 1 m - 6.5 ft. 2 m - 8 ft. 2.5 m - 10 ft. 3 m|
|Intrusion alarm information||Up to three intrusion areas with distance from each configurable area||Up to three intrusion areas with distance from each configurable area|
|Alarms provided||Intrusion (up to 3 zones), Disqualification, Tamper, Anti-climbing, Technical default||Intrusion (up to 3 zones), Disqualification, Tamper, Anti-climbing, Technical default|
|Alarm outputs||RS 485 on each MAXIBUS 3000 compatible column Ethernet (RJ45 on each column) compatible with ModBus TCP server/client Dry contact outputs: 2 relays (NO) per column (configurable assignment)||RS 485 on each MAXIBUS 3000 compatible column Ethernet (RJ45 on each column) compatible with ModBus TCP server/client Dry contact outputs: 2 relays (NO) per column (configurable assignment)|
|Power supply||110 Vac/230 Vac - 60 Hz/50Hz||110 Vac/230 Vac - 60 Hz/50Hz|
|Alignment aid tools||Audible and visual signals on all the columns||Audible and visual signals on all the columns|
|Operating Temperature||-40°F to+158°F (-40°C to+70°C) thermostat-controlled heater on each column||-40°F to+158°F (-40°C to+70°C) thermostat-controlled heater on each column|
|Electromagnetic compatibility||Compliant with European standards (EC label)||Compliant with European standards (EC label)|
|Configuration tools||HTML server integrated into each column (local access)||HTML server integrated into each column (local access)|
|HTML server functions||• Password protected • Read/writing of parameters • Log and real-time infrared-beam status display||• Password protected • Read/writing of parameters • Log and real-time infrared-beam status display|
Ensure barrier is installed on a stable support (not mesh, unstable pole, etc.).
Ensure ground is level to ensure stability of the columns over time. A maximum of 10° elevation will be tolerated between the columns. In elevations above 10°, contact PROTECH’s sales department.
Ensure site is free from vegetation that could cover the beams, regardless of the season / weather.
Check the cleanliness of the covers. Recommended to clean with a soft and damp cloth at least annually.
Infrared technology operates at a wavelength above that of visible light (950nm), which makes the IR beam invisible to the naked eye.
IR beams are transmitted and received by infrared cells – transmitter cells generate and send a pulsed beam to the receiver cells which capture infrared pulses and turn them into electrical signals. When an absence, loss or change in the signal occurs (loss of 95% of the transmitted signal), an intrusion alarm is triggered. To prevent interference of receiver cells by the infrared beams being transmitted, cells are multiplexed.
Multiplexing is a principal whereby infrared pulses are transmitted in a synchronized manner by an optical or wired link between transmitter and receiver columns. This feature optimizes cell alignment (“alignment feedback”). All the PROTECH IR barriers are multiplexed (except BIRIS II).